WS 516
Product Description
Warrior WS516 is a timing advance processor to install on vehicles equipped with electronic injection with Top Dead Center Sensor (TDC or CKP*) with inductive type or Hall Effect and Camshaft Position Sensor (CMP**) with Hall Effect or we can also use for a Top Dead Center Sensor (TDC or CKP*) inductive type and two (2) Camshaft Position Sensor (CMP**) with Hall Effect. This product extends the level of application to vehicles that use two types of sensors (Hall Effect and inductive). With the programming software SGV DTAPs ®, available only to distributors, you can set the drive to optimize its performance in certain brands of vehicles (Standard type programs, Audi, Mercedes, Fiat, Peugeot,Lada, etc.).
Using selection keys, present in the same module, allow you to program 6, 9, 12 and 15 degrees advance curves and so also to select the time of ignition advance insertion.
*CKP (Crankshaft Position Sensor)
**CMP (Camshaft Position Sensor)
Technical Specification
| Code and models |
| WS516 |
| Application |
| CNG/LPG (Compressed Natural Gas / Liquefied Petroleum Gas) |
| Electronic injection engine 3,4,5,6 and 8 cylinders. (Compatible with Flex-Fuel Engine) |
| Vehicles with Top Dead Center Sensor (TDC or CKP*) Inductive type or HALL effect and Phase Sensor (CMP *) type HALL effect. Also allows to use with a Top Dead Center Sensor (TDC or CKP*) Inductive type and two (2) Phase Sensor (CMP *) type HALL effect. |
| Functions |
| Timing Advance Processor: Vary the point of original ignition (advance) while is used to gas |
| Resources |
| It allows to program 6, 9, 12 and 15 degrees of advance curves |
| Selection of the time of inclusion of advance by TPS*. |
| The extent of use extends to vehicles that use two types of sensors (HALL e Inductive) |
| It improves performance in vehicles with sequential gas injection equipment.(Positive pressure) |
| Software |
| SGV DTAPs ® Software Compatible: Windows 7-8 (available for dealers) |
| Interface |
| Electrical measures |
| Power supply: 10-16 Vdc |
| Consumption: 500 mA |
| Temperature: – 10 to + 80 ° c |
| Dimensions and weights |
| Plastic Box PA (WxHxD): 85 x 64 x 33 mm |
| Fixing: diameter 3 mm |
| Individual packing: box 175 x 105 x 60 mm |
| Module weight: 90 grams |
| Packed weight: 450 g |
| Contents of the package |
| Control module |
| Connection wire harness |
| Connector for Emergency |
| User manual |
| Connection accessories |
| Warranty |
| 1 year |
| * CKP (Crankshaft Position Sensor) |
| **CMP (Camshaft Position Sensor) |