SGAS 124 is an electronic module for sequential gas injection, designed for vehicles with three-and four-cylinder engines (3 and 4) with multiple injection (sequential, complete and semi-sequencial).
This module provides a design that helps to optimize the arrangement of functional components, combined with a modern aesthetic and attractive. Design that allows a quick and easy connection, can be wrapped in any angle to install them in the engine compartment.
The management and processing of data are based on a 32-bit processor and modern high efficiency, allowing the dosage needs gas (CNG or LPG) and improves the response of engine parameters. In the construction of this module was also provided the best tools for autodiagnostico and troubleshooting in the installation. This new hardware platform allows you to add new features and further expand the capabilities of automatic adaptation.
The module features a modified gas map accurately by corrections generated at ECU of gasoline for use in gas and is not configured just based on the time of gas injection in normal electronics modules. This ensures the same competence and efficiency of the original system of gasoline for use in gas (CNG or LPG). Also a perfect integration with the factory settings of your vehicle, minimizing the risk of defects associated with a manual calibration bad or inaccurate.
For a perfect fit of SGAS 124 for different brands, is used the configuration software SGAS 2 ® Software. (Compatible: Windows 8-10, Android, Interface: USB 2.0/3.0, Bluetooth Wireless).
SGV products compatible with SGAS 124
Micro switch: SGAS MC3
Level sensors: SCN3 and SCN4
Temperature and pressure sensor: ABS400KPA
SGAS BENEFITS 124
- The smaller box on the market with the greatest possibilities in your class.
- Resistant and waterproof box in composite material (IP65).
- 24-pin connector for automotive applications.
- New diagnostic tools and identifying faults.
- Platform based on 32-bit microprocessor specifies for automotive application.
- Excellent precision in dosing of gas (CNG or LPG).
- Compatible with micro switch SGAS MC3 and MAP sensor with temperature ABS400KPA sesnor.
- Wide range of operating temperatures ( -40° C + 125° C).
- Conforms to the GHG emission standards.
Main features of the SGAS 2 ® Software.
- CNG and LPG compatible.
- Calibration curves system simple and quick.
- Option to configure for map of RPM.
- Automatic calibration and auto adjustment.
- Direct emergency start-up function with a cold engine.
- Direct start-up function the gas with hot engine.
- You can configure more than 10 different brands of gas injectors.
- Allows you to set 6 types of level sensor.
- You can configure any Map and temperature sensor.
- You can configure parameters to suit any gearbox.
- Management of errors and warnings system warnings.
- Allows you to configure the inverter.
- Allows you to configure the turbo engine.
- Graphics parameters with oscilloscope function.